Search found 11 matches

by vidaesunlibro
Thu Aug 02, 2007 11:45 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

i have replaced c5340 as it was one of the faulty ones but still hasn't made a difference. the postal strikes mean that my regulator won't be here for another few days :evil:

Thanks for everyones help so far.
by vidaesunlibro
Tue Jul 31, 2007 6:26 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

i have changed the 3 16v 470uf capacitors by the small digital processor board and i have changed 5 bigger caps ranging from 1000uf to 1500uf by all the diodes near the transformer. there were also 3 caps on the board that were tested and proved to be faulty. i'm quite sure that the IC has blown bec...
by vidaesunlibro
Tue Jul 31, 2007 12:11 am
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

i've changed some capacitors but not the regulator. does that mean i might have to replace the capacitors i've already replaced because the regulator has messed them up again? and yes i know its not a windows format, but wouldn't that be great if it was. plug in the hard drive and it asks you if you...
by vidaesunlibro
Sat Jul 28, 2007 8:09 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

i bought the unit at a bootfair so i have no proof of purchase. i'll wait for the voltage regulator to arrive before i start reformatting and reinstalling system software.
by vidaesunlibro
Sat Jul 28, 2007 4:29 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

HDD software/firmware

Can the HDD be restored to factory condition without being sent back to JVC?
by vidaesunlibro
Thu Jul 12, 2007 9:42 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

I changed the 3 small 680uf capacitors and the bigger capacitors (between 1000uf and 1500uf) and that has not done anything, i'm quite good at electronics and soldering so if someone could tell me where to get the new regulator that would be greatly appreciated. i'm assuming its the one connected to...
by vidaesunlibro
Sat May 12, 2007 7:10 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

is this software available for download or do i have to go and see my local JVC dealer?
by vidaesunlibro
Sat May 12, 2007 4:43 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

thanks for all your help so far but now i think i have another problem. i changed the capacitors and that did nothing so i thought i would change the resistors, i know you told me not to but i was going to throw it away if this didn't work so i had nothing to lose. The unit now does its loading thin...
by vidaesunlibro
Mon May 07, 2007 12:46 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

i havn't got the capacitors yet, but i was looking at the 2 resistors soldered on the bottom of the processor board and checked them with a multimeter and got different values for them even though they have the same colours. what value should they be?
by vidaesunlibro
Tue May 01, 2007 7:47 am
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

yes i have 5v and 12v on the hard drive but i dont have an oscilloscope. i'll wait for the replacement capacitors to arrive then post my results.
by vidaesunlibro
Sun Apr 29, 2007 9:43 pm
Forum: JVC DVD Recorders
Topic: JVC DRM10 DRMH20 DRMH30 loading or sound problems
Replies: 47
Views: 270286

stuck on loading

i have a JVC dr-mh30sek and when i plug it in i get no picture, the DVD and HDD buttons light briefly then switch off and it says loading and the drive flashses blue. when the DVD player is saying loading none of the buttons work. i pressed black eject button on the drive itself (just visible if you...