JVC DRM10 DRMH20 DRMH30 loading or sound problems

For all discussions regarding JVC DVD recorders.

Moderator: andywilks

PCE
Posts: 1
Joined: Tue Aug 19, 2008 4:20 am

Loadin

Post by PCE »

I am working on a DR-MH30SU for a friend. It has the Loading error with the blinking blue light. It did open the DVD drive after holding down the eject button for about 20 seconds. From a previous post, I think this means it is not power supply issue? None of the capacitors are bulging or have any leaks. Is there JVC software available to correct HDD corruption?

efect2000
Posts: 19
Joined: Sun Sep 05, 2010 9:57 am
Contact:

Post by efect2000 »

hello, I follow this threat, as it speaks about the green lines. In sort of 2005, I bought one and suddenly green lines appeared, even being in warranty, I changed most of capacitors, but the problem was still there. Then , i sent it to the official service (in Girona-spain, where I live) and I was told, that firmware was updated. Since then, it has been working with not major problems than "normal". Now I have bought one faulty on ebay, it has these lines. First i have changed the hdd and the lines were there, then i changed the full power supply board and lines dissapeared. I have changed ALL the electrolytic capacitors and fixed some dry joints, but the problem still here. I put then the ps board with all the new capacitors to the other unit, and no green lines appear, I swapped again, and the last item bought with green lines, swapped again and no one has green lines.

Sorry, but i don't understand what "modded" stands for (google translator does not know xD) .
Can you help me? Thank you

User avatar
andywilks
Moderator
Posts: 147
Joined: Mon Jan 24, 2005 11:38 am
Location: Pendle Witch Country, Lancs

Post by andywilks »

Those symptoms sound like a bad connection on one of the pins on the SCART lead.

If the sound continues, it can't really be in the DRMH

Post Reply