having a problem with r-x500 model not working. dim display

Moderator: andywilks

mrRandallSok
Posts: 1
Joined: Fri Nov 08, 2019 8:18 pm
Location: Ghana
Contact:

having a problem with r x500 model not working dim display

Post by mrRandallSok » Sat Jan 04, 2020 5:30 am

Check for a poor or bad ground on the brake light that is not working. It could also be a bad lamp socket. Spray some WD-40 in the socket and re-seat the bulb a couple of times. The only part of the cruise control that is related to the brakes is the brake light switch. Since your brake lights are being switched on/off, that is not the problem. The cruise control is a separate issue. Do you have a manual transmission? If a manual, there is a clutch switch also for the cruise control.

Post Reply