no picture on JVC LT-32DE1BJ

Moderator: andywilks

Post Reply
dbalkwill
Posts: 2
Joined: Wed Feb 23, 2011 7:24 pm

no picture on JVC LT-32DE1BJ

Post by dbalkwill » Wed Feb 23, 2011 7:28 pm

Hi,

I wonder if you can help?

I have a JVC LT-32DE1BJ with integrated PVR (Humax 9300T?).

Normally very reliable but it has decided to stop working in time for half term.

The TV has power and it sounds like the integrated PVR is trying to boot up, I can hear the disk continually trying to spin along with 'beeping' noises.

Is there a way to reset the integrated PVR ?

Thanks

User avatar
andywilks
Moderator
Posts: 147
Joined: Mon Jan 24, 2005 11:38 am
Location: Pendle Witch Country, Lancs

Post by andywilks » Thu Feb 24, 2011 12:32 pm

That doesn't sound good. :cry:

If it gets as far as the loading slider, then please wait and a picture, before then crashing/re booting, you may be able to get it to menu/ dtv setup mode and do a reset defaults which may clear your problem. You need to be quick to do this..as soon as the channel comes on, change it, then goto menu, up one, ok ok etc (very quick)

If it won't even get this far then that sounds far more serious.
There was also a way to reset the dtv board via engineers mode, can't just remember but think if you press i and mute keys together...then find the reset section. Don't tinker with other settings of course. And obviously you do this at your own risk.

I assume you can use the set in say EXT1/scart mode ok?

Andrew

dbalkwill
Posts: 2
Joined: Wed Feb 23, 2011 7:24 pm

Post by dbalkwill » Thu Feb 24, 2011 1:18 pm

Thanks for your help.

No slider appears.

Not tried another av source like EXT1 but I doubt it will work, I can't easily change the av source as no picture/display to show me which av source I'm choosing.

It is still under warranty so that is the route I'll take.

Thanks again.

Andou77
Posts: 1
Joined: Tue Oct 02, 2018 11:07 pm

Re: no picture on JVC LT-32DE1BJ

Post by Andou77 » Wed Oct 03, 2018 2:37 am

dbalkwill wrote:
Wed Feb 23, 2011 7:28 pm
Hi,

I wonder if you can help?

I have a JVC LT-32DE1BJ with integrated PVR (Humax 9300T?).

Normally very reliable but it has decided to stop working in time for half term.

The TV has power and it sounds like the integrated PVR is trying to boot up, I can hear the disk continually trying to spin along with 'beeping' noises.

Is there a way to reset the integrated PVR ? transfers paris airports

Thanks
i have same prblm :shock:

Post Reply