Although I'm not claiming there's any real problem with this series of LCD tv's, which have a stunning picture on all the screen sizes.. much better than last years C50 /C51 series...
I've had one of each model with freeview problems. One locking up, requiring resetting every 1/2 hr.... the other has the freeview stuck on a black screen with a couple of pink and green stripes.
The 23" is a different chassis to the bigger sizes, but I assume the basic Freeview chipset is the same..
Still awaiting a resolution to these....
AW
LT23D50 LT26D50 LCD problems
Moderator: andywilks
jvc d50 lcd freeview fault
you need the soft ware upgrade for the freeview fault
- andywilks
- Moderator
- Posts: 147
- Joined: Mon Jan 24, 2005 11:38 am
- Location: Pendle Witch Country, Lancs
Resolution to these sets
Not as simple as that...
the resolutions are :
26D50 - locked up totally - eventually. It wouldn't take rs232 comms to try the software update- unit returned to JVC- not sure what was actually at fault.
23D50 different series- no software update possible/available. went back to JVC also. Have had another 23D50 with freeview blocking up and random sprays of 'dead pixels' - when its very warm. Memory IC proved to be very thermally sensitive. Maybe the other set was the same.
the resolutions are :
26D50 - locked up totally - eventually. It wouldn't take rs232 comms to try the software update- unit returned to JVC- not sure what was actually at fault.
23D50 different series- no software update possible/available. went back to JVC also. Have had another 23D50 with freeview blocking up and random sprays of 'dead pixels' - when its very warm. Memory IC proved to be very thermally sensitive. Maybe the other set was the same.
locking up
have you tried to resolder the flash have had lots of problems with these
Re: Resolution to these sets
I have this same fault on a "Bush" badged version of the same TV (chassis 17MB16P-1). I am still struggling to find the cause. To start with, it happened after the TV had warmed up, but now it is permanent.andywilks wrote:Have had another 23D50 with freeview blocking up and random sprays of 'dead pixels' - when its very warm. Memory IC proved to be very thermally sensitive.
I've had it to bits today and I've tried dabbing a low value capacitor around the digital tuner area, but with no improvement. It does feel like a capacitor problem though.
I may have to bite the bullet and order the service manual CD 13 from U View: http://www.u-view-circuits.co.uk/tv.html, but it is £59!
Thanks for the suggestion, but unfortunately not. I have scoped the 12V from the external PS and it is ripple free. I tried adding 2000uF across the output anyway, but no improvement. I also tried a 0.22uF polyester in case the output capacitor had high impedance to HF.andywilks wrote:If it has an external power supply block, that will be the problem.
Maybe it's the 5V (or is it 3.3V or 2.5V) inside the TV? It's a major job to dismount it off the wall each time, so I may not get around to checking that for a day or two.
I should also add that when using the digital tuner, the menu is also affected, not just the received picture and sound. It works fine on analogue and with an external input.