Does anyone have a Ghost image of a JVC HM-HDS4 hard drive?
Posted: Wed Mar 02, 2005 12:43 pm
After 7 months use, the recorder ran out of disk space and the operating system froze. It could not successfully boot and even the VCR part was, therefore, unsusable. In attempting to boot, the hard disk would repeatedly seek in the same pattern (from its sounds) so I concluded that the hard disk was mechanically OK but that a software bug had probably corrupted the index. There had been a clue a few days before, I suppose, when a thumbnail did not match the programme pointed to.
The unit was away being 'repaired' for 13 weeks. When it came back it had been given a new hard disk, and so 50 hours of programming was lost. I felt that if the software did have a bug it would return to bite again - and it has. Now out of warranty, JVC did not want to 'repair' the unit. Luckily, my supplier (HiSpek of St. Albans) was very, very helpful and eventually persuaded JVC to do something. They agreed to replace the unit with another, used sample - I am waiting for it to arrive.
I have learned from your board that the operating system of this unit resides on hard disk. It seems that the only way to 'repair' the effects of this software bug is to replace the hard disk in order to obtain a 'clean' index. This is a very expensive procedure and totally uneconomical for the user to have to endure, even once. However, your board shows that one way out is to clone a copy of the hard disk before use.
1. Is it reasonably easy to get into the casing and remove the hard drive?
2. To save me from doing this, does anyone have a Ghost image of a virgin HM-HDS4 hard drive they would be willing to let me have?
This fault shows some problems with this kind of recorder:
i) Neither the user nor a repair shop can format/initialise the hard disk in an emergency.
ii) When the only copy of the software does not reside in firmware but on the hard disk, and is not upgradeable to fix bugs, you are on a hiding to nothing. It could even be said that such equipment is 'not suitable for the purpose'.
Hoping for some help,
Roger Evans
The unit was away being 'repaired' for 13 weeks. When it came back it had been given a new hard disk, and so 50 hours of programming was lost. I felt that if the software did have a bug it would return to bite again - and it has. Now out of warranty, JVC did not want to 'repair' the unit. Luckily, my supplier (HiSpek of St. Albans) was very, very helpful and eventually persuaded JVC to do something. They agreed to replace the unit with another, used sample - I am waiting for it to arrive.
I have learned from your board that the operating system of this unit resides on hard disk. It seems that the only way to 'repair' the effects of this software bug is to replace the hard disk in order to obtain a 'clean' index. This is a very expensive procedure and totally uneconomical for the user to have to endure, even once. However, your board shows that one way out is to clone a copy of the hard disk before use.
1. Is it reasonably easy to get into the casing and remove the hard drive?
2. To save me from doing this, does anyone have a Ghost image of a virgin HM-HDS4 hard drive they would be willing to let me have?
This fault shows some problems with this kind of recorder:
i) Neither the user nor a repair shop can format/initialise the hard disk in an emergency.
ii) When the only copy of the software does not reside in firmware but on the hard disk, and is not upgradeable to fix bugs, you are on a hiding to nothing. It could even be said that such equipment is 'not suitable for the purpose'.
Hoping for some help,
Roger Evans