How do I adjust the RF out channel?

For all discussions regarding the JVC HM-HDS1 (40GB hard disk and S-VHS recorder)

Moderators: andywilks, Geert Jan

Post Reply
Andy Marriott
Posts: 1
Joined: Mon Oct 15, 2007 7:22 pm

How do I adjust the RF out channel?

Post by Andy Marriott »

In fact the rf output is switched off. I need it on for distribution around the house but it has been so long that I can't remember how to do it!

And the instruction book.... useless!

Many thanks.
User avatar
Andy Cippico
Site Admin
Posts: 82
Joined: Tue Jan 18, 2005 8:54 am
Location: England

Post by Andy Cippico »

Quick answer. Need to investigate further:

I thought the answer to this was obvious - until I checked the back of my unit...
Usually VCRs have a variable control to change the UHF output frequency, but I don't see one on mine.
I read in the manual that the UHF output channel can be changed (P98) but I don't know how. Need to scour the manual again...
A.
Post Reply