well. it arrived to day, so i unpacked it, pretty much as described, just the basic unit no extras, no problem as i dont use my remote anyway as i have a pronto all in one.
cracking it open gave me a bit of a surprise, not to mention the handful of foam flowpack that was in the tape mechanism
it's got a Maxtor 80gb Drive fitted
also found one other problem, some hamfisted oaf of a technician has broken a portion off the top of the display panel circuit board, just to the left of the tape slot .... idiots, 7 broken tracks. Luckily no damaged components so with 3 hard board repairs and 4 wire jumpers i should be able to sort that out.
When i asked about the errors they said it simply sat there flashing the blue drive light and never booted up .... which is exactly what my unit did when the drive went. I have a couple of spare drives (condition unknown) and another one i know works, but is currently in a mates pc a couple of hours away which was working fine the last time he used the pc, so i will have to consider running HDDregenerator on the 2 i have and see what happens
Strange thing is, i cant see any changes on the circuit boards .... i thought that the 80gb repair job by JVC required you to swap out the drive, plus one of the eprom chips due to the drive firmware checks
here's the drive details from the drive fitted, i might try and run maxtors drive check utility on it and see if anything comes to light.
Havent been able to power it up yet, as i'm still waiting for the glue to set on the circuit board repair before i repair the tracks ... i could have got lucky and that was the problem, but somehow i doubt it
Maxtor DiamondMax 16 80GB ATA/133
Code: RAMC1TU0
LBA: 160086528
Mfg Date: 27Nov2003
Part No:4R08OL0 6214P1